Ballasts

• Comes completely wired and ready for use
• High quality ballast will provide years of trouble-free use
• Quad tap ballast can operate 120, 208, 240 and 277 volts. Comes pre-wired for 120 volt operation
• Lamp cord receptacle accepts all Sun System® lamp cords (sold separately). "Donkey Ear" flaps hold lamp cord plug securely in place
• High temperature domestic capacitor ensures long-lasting durability
• Heat slots remove excess heat from the ballast
• Galvanized steel enclosure

• Power factor is 99% efficient
• Silent operation with built-in axial fans for cooling
• Built-in safety features
• Built-in short circuit protection
• Constant wattage output. No flickering (stroboscopic effects), resulting in perfect illumination
• Weighs significantly less than magnetic core ballasts
• Built-in fuse protection
• Thermal overload protection
• 400/600 watt - 2 year factory direct warranty. 1000 watt - 1 year factory direct warranty
• New models can operate on both 120 & 240

>UNIQUE FEATURE!
All Future-Brite™ ballasts offered by Sunlight Supply® include our proprietary female lamp cord receptacle. It will accept our proprietary, patented male lamp cord, making these units compatible with all Sun System® reflectors.

• Power factor is 99% efficient.
• Silent operation with built-in axial fans for cooling.
• Can ignite both MH & HPS lamps.
• Built-in safety features.
• Built-in short circuit protection.
• Improves lamp life.
• Constant wattage output. No flickering (stroboscopic effects), resulting in perfect illumination.
• Soft starting - No start-up power spikes.
• Weighs significantly less than magnetic core ballasts.
• Built-in fuse protection.
• Two built-in fuses.
• Thermal overload protection.
• Sleep mode function for safety.
• These ballasts are voltage specific. They are either 120 or 240. They cannot be switched from one voltage to another.
• 2 YEAR WARRANTY

Electronic H.I.D. ballasts are quickly growing in popularity. They operate using electronic circuitry instead of magnetic ballasts made from steel & copper.

These come wired with our standard female lamp cord receptacle that accept our proprietary, patented male lamp cord making these units compatible with all Sun System® reflectors. Purchase lamp cord with socket assembly separately.

• Power factor is 99% efficient
• Silent operation with built-in axial fans for cooling
• Built-in safety features
• Built-in short circuit protection
• Constant wattage output. No flickering (stroboscopic effects), resulting in perfect illumination
• Weighs significantly less than magnetic core ballasts
• Built-in fuse protection
• Thermal overload protection
• 400/600 watt - 2 year factory direct warranty. 1000 watt - 1 year factory direct warranty
• New models can operate on both 120 & 240

>UNIQUE FEATURE!
All Future-Brite™ ballasts offered by Sunlight Supply® include our proprietary female lamp cord receptacle. It will accept our proprietary, patented male lamp cord, making these units compatible with all Sun System® reflectors.

• Drives lamp to peak performance.
• Saves energy! Uses 5-12% less energy than magnetic H.I>D. (depending on lamp specification).
• Extremely efficient - 99.9% power factor.
• Soft starting - increases lamp life & reduces lumen depreciation.
• Anodized, extruded aluminum housing.
• Lightweight- 400W weighs 11lbs./600W weighs 14 lbs.
• Can ignite both HPS & MH lamps.
• Very quiet operation.
• Instructions & warranty information.
• Rubber feet reduce noise and vibration

Features the exclusive Smart Volt™ feature. Operates on both 120 & 240 volt power. Simply unplug one cord and plug in the other. 8-foot 120 volt power cord included. Purchase 240 volt cord separately (prod # 903082). 1000 watt Galaxy™ Electronic Ballast is 240 volt only.

These come wired with our standard female lamp cord receptacle that accepts our proprietary, patented male lamp cord making these units compatible with all Sun System® reflectors. Purchase lamp cord with socket assembly separately.

• 5kv Socket Assembly with 15 Ft. Lamp Cord Sold Separately
• NOW FEATURES OUR EXCLUSIVE MULT-VOLT POWERCORD™ MVP.
• Our extruded aluminum ballast enclosure offers more heat dissipating surface area than competitive light systems
• The louvered end plates and side panels help cool the ballast for years of troublefree use!
• Durable white powder coated enclosure
• Heavy duty handle for easy carrying or hanging
• Detachable lamp cord makes set-up easy
• Rubber feet
• High temperature capacitor
• Completely assembled
• Comes standard with an 8ft - 120 volt MVP™ power cord. Purchase the 240 volt MVP™ power cord separately (part # 903132)
• 5 YEAR WARRANTY

• 5kv Socket Assembly with 15 Ft. Lamp Cord Sold Separately
• NOW FEATURES OUR EXCLUSIVE MULT-VOLT POWERCORD™ MVP.
• Our extruded aluminum ballast enclosure offers more heat dissipating surface area than competitive light systems
• The louvered end plates and side panels help cool the ballast for years of troublefree use!
• Durable white powder coated enclosure
• Heavy duty handle for easy carrying or hanging
• Detachable lamp cord makes set-up easy
• Rubber feet
• High temperature capacitor
• Completely assembled
• Comes standard with an 8ft - 120 volt MVP™ power cord. Purchase the 240 volt MVP™ power cord separately (part # 903132)
• 5 YEAR WARRANTY

• Exclusive, two part ballast enclosure is the coolest running light system in the industry. The ballast core is in one compartment while the capacitor & ignitor are in the other. This protects these critical components from the heat of the ballast. This significantly adds to the reliability & life of this light system
• With our Exclusive Power Pointer™ it's easy to switch from 120 volt to 240 volt power! Simply unplug the detachable 120 volt Smart Volt™ cord (included), turn the Power Pointer™ arrow down for 240 volt power and plug in a 240 volt Smart Volt™ cord. THAT'S IT! (240 volt Smart Volt™ cord sold separately)
• The EZ Cap™ Door allows for easy access to the capacitor in the event it needs to be replaced. Eliminates the need to be replaced. Eliminates the need to disassemble the complete ballast housing
• High quality ballast will ensure years of trouble-free use
• High temperature capacitor ensures long lasting durability
• Heat slots & louvers remove excess heat from the ballast
• Aluminum ballast enclosure dissipates heat

• Exclusive, two part ballast enclosure is the coolest running light system in the industry. The ballast core is in one compartment while the capacitor & ignitor are in the other. This protects these critical components from the heat of the ballast. This significantly adds to the reliability & life of this light system
• With our Exclusive Power Pointer™ it's easy to switch from 120 volt to 240 volt power! Simply unplug the detachable 120 volt Smart Volt™ cord (included), turn the Power Pointer™ arrow down for 240 volt power and plug in a 240 volt Smart Volt™ cord. THAT'S IT! (240 volt Smart Volt™ cord sold separately)
• The EZ Cap™ Door allows for easy access to the capacitor in the event it needs to be replaced. Eliminates the need to be replaced. Eliminates the need to disassemble the complete ballast housing
• High quality ballast will ensure years of trouble-free use
• High temperature capacitor ensures long lasting durability
• Heat slots & louvers remove excess heat from the ballast
• Aluminum ballast enclosure dissipates heat

• Exclusive, two part ballast enclosure is the coolest running light system in the industry. The ballast core is in one compartment while the capacitor & ignitor are in the other. This protects these critical components from the heat of the ballast. This significantly adds to the reliability & life of this light system
• With our Exclusive Power Pointer™ it's easy to switch from 120 volt to 240 volt power! Simply unplug the detachable 120 volt Smart Volt™ cord (included), turn the Power Pointer™ arrow down for 240 volt power and plug in a 240 volt Smart Volt™ cord. THAT'S IT! (240 volt Smart Volt™ cord sold separately)
• The EZ Cap™ Door allows for easy access to the capacitor in the event it needs to be replaced. Eliminates the need to be replaced. Eliminates the need to disassemble the complete ballast housing
• High quality ballast will ensure years of trouble-free use
• High temperature capacitor ensures long lasting durability
• Heat slots & louvers remove excess heat from the ballast
• Aluminum ballast enclosure dissipates heat

• More lumens generated per watt of electricity consumed - Lumatek™ ballasts have increased efficiency over magnetic ballasts. They lose fewer watts from the power supply to the lamp. This is a power factor of 95%+. The high frequency output results in low power loss
• Fast start-up - they reach full brightness quickly
• Completely silent
• Small compact design
• Produce less heat
• Cut-off circuitry - cut off when a short is detected. For ultimate safety
• Fully interchangeable - Lumatek™ ballasts can light both HPS and MH bulbs (excluding the 750W which is HPS only)

>UNIQUE FEATURE!
All Lumatek™ ballasts come wired with our standard female lamp cord receptacle that accepts our proprietary, patented male lame cord, making these units compatible with all Sun System® reflectors. Purchase lamp cord with socket assembly separately.

• More lumens generated per watt of electricity consumed - Lumatek™ ballasts have increased efficiency over magnetic ballasts. They lose fewer watts from the power supply to the lamp. This is a power factor of 95%+. The high frequency output results in low power loss
• Fast start-up - they reach full brightness quickly
• Completely silent
• Small compact design
• Produce less heat
• Cut-off circuitry - cut off when a short is detected. For ultimate safety
• Fully interchangeable - Lumatek™ ballasts can light both HPS and MH bulbs (excluding the 750W which is HPS only)

>UNIQUE FEATURE!
All Lumatek™ ballasts come wired with our standard female lamp cord receptacle that accepts our proprietary, patented male lame cord, making these units compatible with all Sun System® reflectors. Purchase lamp cord with socket assembly separately.

• More lumens generated per watt of electricity consumed - Lumatek™ ballasts have increased efficiency over magnetic ballasts. They lose fewer watts from the power supply to the lamp. This is a power factor of 95%+. The high frequency output results in low power loss
• Fast start-up - they reach full brightness quickly
• Completely silent
• Small compact design
• Produce less heat
• Cut-off circuitry - cut off when a short is detected. For ultimate safety
• Fully interchangeable - Lumatek™ ballasts can light both HPS and MH bulbs (excluding the 750W which is HPS only)

>UNIQUE FEATURE!
All Lumatek™ ballasts come wired with our standard female lamp cord receptacle that accepts our proprietary, patented male lame cord, making these units compatible with all Sun System® reflectors. Purchase lamp cord with socket assembly separately.

• More lumens generated per watt of electricity consumed - Lumatek™ ballasts have increased efficiency over magnetic ballasts. They lose fewer watts from the power supply to the lamp. This is a power factor of 95%+. The high frequency output results in low power loss
• Fast start-up - they reach full brightness quickly
• Completely silent
• Small compact design
• Produce less heat
• Cut-off circuitry - cut off when a short is detected. For ultimate safety
• Fully interchangeable - Lumatek™ ballasts can light both HPS and MH bulbs (excluding the 750W which is HPS only)

>UNIQUE FEATURE!
All Lumatek™ ballasts come wired with our standard female lamp cord receptacle that accepts our proprietary, patented male lame cord, making these units compatible with all Sun System® reflectors. Purchase lamp cord with socket assembly separately.

• More lumens generated per watt of electricity consumed - Lumatek™ ballasts have increased efficiency over magnetic ballasts. They lose fewer watts from the power supply to the lamp. This is a power factor of 95%+. The high frequency output results in low power loss
• Fast start-up - they reach full brightness quickly
• Completely silent
• Small compact design
• Produce less heat
• Cut-off circuitry - cut off when a short is detected. For ultimate safety
• Fully interchangeable - Lumatek™ ballasts can light both HPS and MH bulbs (excluding the 750W which is HPS only)

>UNIQUE FEATURE!
All Lumatek™ ballasts come wired with our standard female lamp cord receptacle that accepts our proprietary, patented male lame cord, making these units compatible with all Sun System® reflectors. Purchase lamp cord with socket assembly separately.

• With our exclusive Power Pointer™, it's easy to switch from 120 to 240 volt power! Simply unplug the detachable 120 volt power cord (included), turn the Power Pointer™ arrow down for 240 volt power and plub in a 240 volt power cord (sold separately). THAT'S IT!
• High quality ballast will ensure years of trouble-free use.
• Lamp cord receptacle - Accepts all Sun System® lamp cords (sold separately). "Donkey Ear" flaps hold lamp cord plug securely in place.
• High temperature capacitor ensures long lasting durability.
• A barrier wall between the ballast and the capacitor/ignitor helps keep the critical components cool.
• Heat slots & louvers remove excess heat from the ballast.
• Aluminum ballast enclosure dissipates heat.
• Ballast features copper windings.

• 5kv Socket Assembly with 15' Lamp Cord Sold Separately
• Aluminum heat sync ballast enclosure
• Heavy-duty key-way handle
• Major brand ballast
• Rubber feet - reduces noise, vibration and provides air flow under the ballast for cool running
• High temperature capacitor
• Completely assembled
• Printed UPS shippable carton
• 5 Year Warranty
• Technical Guide
• Comes standard with an 8 foot - 120 volt MVP™ power cord. Purchase the 240 volt MVP™ power cord separately (part # 903132)
• NOW FEATURES OUR EXCLUSIVE MULTI-VOLT POWERCORD™ MVP!!

• 5kv Socket Assembly with 15 Ft. Lamp Cord Sold Separately
• The ballast includes:
• Die cast aluminum housing
• Louvers for cooling
• Rubber feet
• Multi-volt ballast
• 8 ft. grounded power cord
• White powder coated finish
• Printed UPS shippable carton
• High temperature domestic
• capacitor
• All Systems wired for 120 volt operation unless specified otherwise. For 240 volt, Add $8.95 Suggested Retail
• 5 YEAR WARRANTY

• 5kv Socket Assembly with 15 Ft. Lamp Cord Sold Separately
• The ballast includes:
• Die cast aluminum housing
• Louvers for cooling
• Rubber feet
• Multi-volt ballast
• 8 ft. grounded power cord
• White powder coated finish
• Printed UPS shippable carton
• High temperature domestic
• capacitor
• All Systems wired for 120 volt operation unless specified otherwise. For 240 volt, Add $8.95 Suggested Retail
• 5 YEAR WARRANTY

• 5kv Socket Assembly with 15 Ft. Lamp Cord Sold Separately
• The ballast includes:
• Die cast aluminum housing
• Louvers for cooling
• Rubber feet
• Multi-volt ballast
• 8 ft. grounded power cord
• White powder coated finish
• Printed UPS shippable carton
• High temperature domestic
• capacitor
• All Systems wired for 120 volt operation unless specified otherwise. For 240 volt, Add $8.95 Suggested Retail
• 5 YEAR WARRANTY

• 5kv Socket Assembly with 15ft Lamp cord sold separately.
• Aluminum heat sync ballast enclosure
• Heavy-duty key-way handle
• Major brand ballast
• Rubber feet - reduce noise, vibration and provide air flow under the ballast for cool running
• High temperature capacitor
• Completely assembled
• Printed UPS shippable carton
• 5 Year Warranty
• Technical Guide
• Comes standard with an 8ft - 120 volt MVP™ power cord. Purchase the 240 volt MVP™ power cord separately (part# 903132)
• This unique ballast has all the features that are incorporated into our Sun System® 1 fixture, but adds the ability to run either MH or HPS
• Changing from one lamp type to the other is easy merely insert the appropriate lamp and set the switch to the correct operating setting (part # 903132)

• Comes standard with two 8' - 120 volt MVP™ powercords. Purchase the 240 volt MVP™ powercords separately
• Separate power cords allow independent operation of MH & HPS lamps
• 18" aluminum heat sync ballast enclosure
• Heavy-duty keyway handle
• Major brand Metal Halide and High Pressure Sodium ballasts
• Rubber feet - reduces noise, vibration and provides air flow under the ballast for cool running
• High temperature capacitors
• US Patent No's: D543941, D544840 and D545764

800 watt: 1 MS400 halide + 1 HPS400 = 87,500 lumens
1000 watt: 1 MS400 halide + 1 HPS600 = 130,000 lumens